Which Linux file is used to map partitions to the file system?
fstab
Which Linux packages have the ability to notify the user of dependency issues? (Select two.)
Debian
RPM
While troubleshooting a Linux server, sometimes it is necessary to terminate a process when it has become unresponsive. This can be accomplished by using which command?
kill
Which Linux utility will display the system's current IP address, subnet mask, default gateway, DNS server, DHCP server, and the MAC address of the network card?
ifconfig
Which Redundant Array of Inexpensive Disks (RAID) level is also known as disk striping?
RAID 0
Which type of files can be helpful in identifying several types of problems in a Linux server?
log files
While booting a Linux server, the booting process has stopped. Upon troubleshooting, an 'L' error code is discovered. What does this indicate?
The second stage of LILO did not load.
Which Redundant Array of Inexpensive Disks (RAID) level is also known as disk striping with parity?
RAID 5
What is the loopback address that a technician would ping to verify that TCP/IP is correctly installed?
127.0.0.1
Which unit is used to measure the speed of today's CPUs?
GHz
Where are video card drivers located in a Linux system?
X Server
When selecting a video card for a server, which of the following would be one important feature to consider for performance?
amount of on-board RAM
What is the main concept to be aware of when installing hardware on a Linux system?
compatibility
Which network troubleshooting device transmits a sonar type pulse through a cable?
TDR
Which device is used to check for broadcasts, collisions, usage levels, and errors on an Ethernet network?
LAN meter
Which device is used in electronic calibration and to measure signal voltage over time within a cable?
oscilloscope
Which device is used to check for cable breaks and shorts?
cable tester
Which device is used to measure electronic pulses through a cable and to determine shorts or breaks in the cable?
digital volt-ohm meter
Which type of cable is used to connect two computers without going through a hub?
crossover
Which of the following ports do external peripherals use to connect to a computer? (Select four.)
SCSI
parallel
USB
serial
fstab
Which Linux packages have the ability to notify the user of dependency issues? (Select two.)
Debian
RPM
While troubleshooting a Linux server, sometimes it is necessary to terminate a process when it has become unresponsive. This can be accomplished by using which command?
kill
Which Linux utility will display the system's current IP address, subnet mask, default gateway, DNS server, DHCP server, and the MAC address of the network card?
ifconfig
Which Redundant Array of Inexpensive Disks (RAID) level is also known as disk striping?
RAID 0
Which type of files can be helpful in identifying several types of problems in a Linux server?
log files
While booting a Linux server, the booting process has stopped. Upon troubleshooting, an 'L' error code is discovered. What does this indicate?
The second stage of LILO did not load.
Which Redundant Array of Inexpensive Disks (RAID) level is also known as disk striping with parity?
RAID 5
What is the loopback address that a technician would ping to verify that TCP/IP is correctly installed?
127.0.0.1
Which unit is used to measure the speed of today's CPUs?
GHz
Where are video card drivers located in a Linux system?
X Server
When selecting a video card for a server, which of the following would be one important feature to consider for performance?
amount of on-board RAM
What is the main concept to be aware of when installing hardware on a Linux system?
compatibility
Which network troubleshooting device transmits a sonar type pulse through a cable?
TDR
Which device is used to check for broadcasts, collisions, usage levels, and errors on an Ethernet network?
LAN meter
Which device is used in electronic calibration and to measure signal voltage over time within a cable?
oscilloscope
Which device is used to check for cable breaks and shorts?
cable tester
Which device is used to measure electronic pulses through a cable and to determine shorts or breaks in the cable?
digital volt-ohm meter
Which type of cable is used to connect two computers without going through a hub?
crossover
Which of the following ports do external peripherals use to connect to a computer? (Select four.)
SCSI
parallel
USB
serial
0 comment(s) to... “CISCO ITE2: key answer Part three”
0 komentar:
Posting Komentar